JD60-4-DB / 4 Antenna Kit (17dBm Dual Band)
JD60-4-DB / 4 Antenna Kit (17dBm Dual Band)
(12,000 - 18,000 sq ft)
Product Overview
The JD60-4-DB Indoor Cellular Repeater Kit is a high-powered, manual and automatic gain adjustable repeater system that is perfect for providing wireless coverage to a medium sized office building, department store, warehouse, underground parking lot, or multi-story building.
A certified test report is included with each repeater that leaves our factory, so you are assured of strict quality controls.
|
|
The JD60-4-DB (Dual Band) Indoor Cellular Repeater Kit is supplied with 4 Ceiling-Mount Service Antennas and includes all the peripheral items needed to complete the installation. This kit is designed to provide enhanced cell phone coverage indoors (voice & data) for buildings up to 18,000sq ft.
It's a perfect solution for applications like large homes, medium office buildings, restaurants, warehouses, underground parking lots and VIP rooms.At its heart kit is an industrial grade 65dB Gain Dual Band repeater that includes carrier grade features like Automatic Gain Control (AGC), Manual Gain Control and MUTE Auto Shut Down to name a few.
JDTECK also offers you the option to swap out any of the dome antennas for wall mount panel antennas at no extra cost. The standard kit is supplied with a 75ft length of coax that runs from the outdoor antenna to the repeater and 50ft from the repeater to each indoor antenna. You also have the option to customize these coax lengths as needed. (Minimal additional cost).
Interested in adding more service antennas for expanded coverage? Yes, it is possible with the JD60-4-DB Repeater. You could easily add as much as 4 additional indoor antennas to this repeater (total 8), with a few extra components.
Standard Kit Includes:
Flat Panel Donor Antenna and Mounting Bracket
Universal Antenna Bracket Arm
Lightening Surge Protector
75ft Length Coax - Donor
JD60-4-DB Repeater & Power Supply
N Male / N Male RF Adapter
4-Way Signal Splitter
50ft Length Coax – (4) Indoor
Ceiling Mount Indoor Service Antennas – (4)
User Manual
Warranty Card
Free Technical Phone Support
To maintain safe and specific output signal levels, this advanced repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater within a 15dB range depending on environmental conditions. In addition, it also has built-in attenuation dip switches that allow you to manually attenuate (fine tune) the repeater's uplink and downlink channels in 1db steps up to 31dB, using color changing LED's as a status indicator.
These Alarm LED's are used as a guide to prevent your installation from re-producing errors due to excessive input signal strength if a pre-amp is used, or from signal oscillation due to the indoor antenna and outdoor antenna being too close to each other, which can have adverse effects on a base station.
A Network Safe / MUTE Feature has also been added to this repeater to protect the cellular network. In short, the repeater will stop transmitting if any errors or signal oscillation is detected within 2 sec of detection. It will cycle for 30 sec then attempt to transmit again. If no adjustment in gain has been made to correct the error within the 30sec MUTE cycle, the system will again shut down after 2 sec. It will run this sequence for a total of 3 times and then shut down completely. Unplugging and powering back up the unit will reset this sequence. The JD60-4-DB Indoor Repeater is designed to be transparent to the network and will therefore support the same number of calls the BTS in the area can support. It is also compact enough that it can be placed within an electrical closet where space is limited.
Frequency Chart
Model | Uplink | Downlink | |
---|---|---|---|
JD60-4-819 | CELL | 824~849 MHz | 869~894 MHz |
PCS | 1850~1910 MHz | 1930~1990 MHz | |
JD60-4-918 | GSM900 | 890~915 MHz | 935~960 MHz |
DCS | 1710~1785 MHz | 1805~1880 MHz | |
JD60-4-921 | GSM900 | 890~915 MHz | 935~960 MHz |
WCDMA | 1920~1980 MHz | 2110~2170 MHz | |
Filter Bandwidth | GSM & CDMA 25MHz | PCS 60MHz AWS 45MHz | LTE 11Mhz | ||
Max total output power | ≥15dBm | ≥15dBm | |
Max. Gain | ≥65dB | ≥65dB | |
Gain Flatness | CDMA & GSM: ≤5dB, PCS & DCS: ≤8dB AWS ≤6dB, LTE ≤3dB | ||
AGC Range | ≥15dB - Auto shut off after 15dB (MUTE) | ||
Maximum Input Power | 0dBm | ||
Gain Control Range(MGC) | ≥31dB in step of 1dB by Dip Switch | ||
V.S.W.R | ≤2 | ||
Intermodulation | 9KHz~1GHz≤-36dBm | 9KHz~1GHz≤-20dBm | |
1GHz~12.75GHz≤-30dBm | 1GHz~12.75GHz≤-20dBm | ||
Spurious Emission | 9KHz~1GHz≤-36dBm 1GHz~12.75GHz≤-30dBm |
||
Spurious Emission Mask | Complies with 3GPP TS 25.106 | ||
Modulation Accuracy | Complies with 3GPP TS 25.106 | ||
Peak Code Domain Error | Complies with 3GPP TS 25.106 | ||
Frequency Stability | ≤0.01ppm | ||
ACPR | ≥30dB @±5MHz&±10MHz | ||
Noise Figure (@ max gain) | ≤6dB | ||
Group Delay | ≤4.5 micro Sec | ||
Impedance | 50Ω |
Mechanical Chart
Power Supply | Input 90- 264 VAC,50 Hz, transformer: 12V/5A |
Cooling | Heat Sink Convection Cooling |
Power Consumption | < 35W |
Operating Temperature | -10°~+50°C (14F ~ 122F) |
RF Connector | N Female |
Weather Proof | IP40 |
Dimension | 250 x 145 x 53mm (9.84" x 5.70" x 2") |
Weight | ≤3.2Kg (7.1Lbs) |
LED Alarm | Standard |
Power LED | Power Indicator |
ALC LED | Amber @ ALC 1~5dB, Red @ ALC 15-20dB |
LED off after 5 seconds red color |
Drop File