Home :: Main Products :: Repeaters :: Consumer Repeaters :: JD65-XT Series

JD65-XT Series

FCC Approved. ID: SQXJD65-XT
18 Months Warranty
30 Day Money Back Satisfaction Guarantee
Medium Sized Coverage Area (3000 - 5000 Sq ft)
Dual Band Models Available
Small size, light - weight
Supports 90-240 Volts
AGC: Automatic Gain Control
ALC: Automatic Limit Control
Automatic output interception function (MUTE)
Free! - Phone Tech Support
Testimonials! - Click Here

NB: This product is the
Repeater & Power Supply Only.
For complete kits Click Here.

Mhz	Buy Now	Option
800 / 850	$455.00	A
900	$455.00	B
1800	$455.00	C
1900	$455.00	D
800 / 1900	$650.00	E
900 / 1800	$650.00	F
900 / 2100	$650.00	G

A -Single Band USA (GSM,CDMA,GPRS,EDGE)
B -Single Band Global (GSM)
C -Single Band Global (GSM,DCS)
D -Single Band USA (GSM,PCS,CDMA,EDGE,3G)
E -D/B USA (GSM,CDMA,GPRS,EDGE,PCS,3G)
F -Dual Band Global (GSM,DCS)
G -Dual Band Global (GSM,3G,UMTS,WCDMA)

Add to Wishlist

Features

The JD65-XT Full Duplex Communications Cellular Repeater from JDTECK is a great solution for providing a cost effective improvement in cellular in-building coverage of a Home, Office, VIP Lounge, Restaurant or Underground Parking Lot in the quickest time possible. Models are available for networks all around the world.

To maintain safe and specific output signal levels, this repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals. In addition, to preventing the repeater from re-producing errors due to excessive signal strengths from outside or, oscillation which can have adverse effects on a base station, the repeater runs an auto shutdown function, which disables the repeater from transmitting if this were ever to occur.

It is designed to improve the voice or data transmission quality of an area by receiving, amplifying and re-transmitting signals of the base station into a specified area. Some service providers have reported their customers getting as much as 4000sq - 6000sq ft of coverage, this however will depend on the strength of the signal being received by the outdoor antenna, the amount of internal walls, and the type of material the internal walls are made of.

Product Benefits:

The benefits of the JD65-XT Indoor Repeater are numerous. It provides a wireless improvement in reception to areas that were once affected by poor cellular reception. All devices operating within the frequency range of the repeater will see an improvement in performance. Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.

With a wireless in-building repeater, you no longer have the inconvenience or time wasted of having to leave the building to receive or make a cellular call. The JD65-XT Indoor Cellular Repeater ensures that your line of communication will always be there. No more missed business calls or loss of sales.

Improved wireless coverage in your home or office. No wires connected to your phone!
Unlimited number of simultaneous calls supported
Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)
No more running outside or near windows to complete your calls or receive pages.
Quick and easy installation. All necessary hardware included in one complete kit.
Free Technical support.

Installation: The JD65-XT Repeater is the preferred choice of many service providers due to its superior quality and low noise values. No special tools, test equipment or technical knowledge of your network is required to complete this install. The repeater is fully adjustable and will fine-tune itself as conditions change. The active software is very stable and will thus provide years of trouble free service. The JD65-XT Repeater also comes in a number dual band combinations. Simply send us an email if you cannot determine which model kit will suit your needs.

Specifications

Frequency & Operating Mechanical

FCC Approved		ID: SQXJD65-XT	Input / Output RF	N Female
Maximum Gain		≥ 60dB	Dimension	H* W * D = 183 x 128 x 46.3 (mm)
Gain Flatness (P-IP)		GSM850 / CDMA / GSM ≤ 8dB DCS / PCS ≤ 10dB WCDMA ≤ 6dB	Cooling	Convection
			Weight	< 1 kg / 2.2Lbs
Noise Figure		≤ 5dB	Operating Temperature	-10'C ~ 50'C / 14F - 122F
AGC Range		20dB	AC/DC Power Supply	Input AC 90-265v , Output DC 9V
Output Power		UL ≥10dBm, DL ≥10dBm	Weather Proof	IP 40
Propagation Delay		≤ 0.5 us (micro second)
Frequency Stability		≤ +- 0.01 ppm
Impedance		50 Ohms
ACRR	WCDMA	≥30dB ＠±5MHz＆±10MHz
Spurious Emission		Complies with 3GPP TS 25.106
Modulation Accuracy		Complies with 3GPP TS 25.106
Intermodulation Products		Complies with 3GPP TS 25.106
Spurious Emission Mask		Complies with 3GPP TS 25.106
Peak Code Domain Error		Complies with 3GPP TS 25.106

Bandwidth & Part Numbers

A. Frequency Range
(USA Cellular - CDMA, GSM)
Part # JD65-XT850

Forward Path

869-894 (MHz)

Reverse Path

824-849 (MHz)

B. Frequency Range
(GSM European) & Paging Systems
Part # JD65-XT900 Forward Path 935-960 (MHz)

Reverse Path 890-915 (MHz)

C. Frequency Range
(European DCS)
Part # JD65-XT18 Forward Path 1805-1880 (MHz)

Reverse Path 1710-1785 (MHz)

D. Frequency Range
(USA - PCS / CDMA / GSM / GPRS)
Part # JD65-XT19 Forward Path 1930-1990 (MHz)

Reverse Path 1850-1910 (MHz)

E. Frequency Range
(USA - PCS / CDMA / GSM / GPRS)
Part # JD65-XT819 Forward Path 869-894 / 1930-1990 (MHz)

Reverse Path 824-849 / 1850-1910 (MHz)

F. Frequency Range
(European - GSM / DCS)
Part # JD65-XT918 Forward Path 935-960 / 1805-1880 (MHz)

Reverse Path 890-915 / 1710-1785 (MHz)

G. Frequency Range
(European - 900 / 3G)
Part # JD65-XT921
Forward Path
935-960 / 2110-2170 (MHz)

Reverse Path
890-915 / 1920-1980 (MHz)

Download PDF Brochure

Click here to Download

JDTECK - Phone Booster & Building Repeaters

JDTECK - Wireless Building Cellular & Cell Phone Adapters